GJD710 GSM SPEECH & TEXT AUTODIALLER FOR BURGLAR ALARM SYSTEMS

The GJD710 GSM Speech and Text Communicator provides a simple yet effective solution to all your security equipment notification needs. Once triggered the GS Communicator automatically sends a voice or text message to one of 9designated, pre-programmed telephone numbers providing a fast and reliable warning, thus ensuring total peace of mind.

6 inputs allow connection to intruder detection alarm panels, nurse call devices, gas and flood sensors, etc. The additional 4 outputs can be linked to other associated equipment – strobe, siren or sounder..

FEATURES

9 programmable dial-out numbers for each trigger

Programmable voice messages or SMS sent to some or all phone numbers on trigger

Trigger inputs can be programmable as instant or “double knock” (2 activations needed within 60 seconds)

Programmable dial-out/SMS delay after trigger

Programmable trigger “runaway” prevention – ability to limit number of dial-outs/SMS’s to 50 in any 24 hours

Removable antenna allows remote antenna connection to optimise GSM reception

Built-in microphone

Built-in “listen in” – open up trigger or via dial in

“Pay as you go” SIM low credit indication depending on the network functionality.

Battery back-up

Dialler outputs can be programmed as user-activated only or user-activated + trigger/event follow activated

Outputs can be programmed as toggle latching on/off or momentary

Users can activate outputs remotely via dial-in

Network provider field strength indicator

Back-lit LCD shows text in any of 8 languages

Programmable as either a silent (dial-out only) or audible alarm

Please note:  A Sim card is not included, these need to be purchased seperately.