The IS 60T timer is a simple low cost and versatile timer that is suitable for security, fire, door access, CCTV systems and many other applications where a reliable timer is required. It has been designed for 12 or 24 volt DC operation and has a double pole relay rated at 8 Amp 240 Volt AC complete with Led indication.

Time intervals:
 
Range 1: 0-60 seconds adjusted by the potentiometer
 
Range 2: 1-60 minutes selected by plug in link JP2
 
Two modes of operation are provided and are selected by plug in link JP1.
 
Mode 1 - Link pins 1 and 2 on JP1. The relay activates for the timed period. In Mode 1 there are 2 options.
 
A. With JP4 link out the relay activates for a timed period and then de-energises even if a trigger is still present. The timer will reset after removal of the trigger input.
 
B. With JP4 link in the relay will activate for the timed period and then de-energise.The timer will lock out until reset pins JP3 is shorted.
 
Mode 2 -  Link pins 2 and 3 on JP1. The relay activates after the timed period. In Mode 2 there are 2 options.
 
A. Relay activates momentarily after the timed period (link JP4 out). If a trigger is still present after the timed period the relay will stay energised until the trigger is removed.
 
B. Relay latched on (link JP4 in) until reset pins JP3 shorted momentarily.
 
Trigger inputs:
 
The timer will start when an input is applied to the ‘T  terminal. This may be positive or negative voltage. The input can be a brief pulse or a continuous signal.

Write a review

Note: HTML is not translated!
    Bad           Good

Interface Solutions 0-60 sec/min Timed Relay

  • £25.26

  • Ex Tax: £21.05

Tags: interface solutions 0-60 secmin, interface solutions uk ltd, is-60t, relays timer modules