The ADS 120 amplifier brings basic functionality, ADS reliability and great value to the ADS range for a variety of commercial and industrial installations.
The ADS 120 has a combines ¼” and XLR input socket on Mic1 and has a VOX priority level control. Mic 2 & 3 inputs are via ¼” Jack. The ADS120 has 2 AUX inputs both via RCA phono plugs and 1 Telephone input by phoenix connector.
The ADS120 has the following outputs: 100V line, 70V line and 4-16Ohm low impedance output. 1 Line output via phono plugs .
On the front of the ADS120 It has a master volume control and controls for Bass, Treble, Mic1, Mic2, Mic3, Aux1, Aux2, Tel and an input for Mic1.
Internally the ADS120 has High Temp, Short Circuit and Overload protection.
Technical Specification:
-
Model: ADS120
-
Power Output (RMS): 120W Continuous
-
Output Impedance: 70V, 100V , 4-16 Ohm
-
THD at rated power: Less than 0.5%
-
Frequency Response: (+3dB) 50Hz ~18KkHz
-
Aux Sensitivity / impedance:: 400mV/15KOhm
-
Mic Sensitivity / impedance: 5mV/600Ohm
-
Signal/Noise ratio: (AUX) Better than 62dB
-
Signal/Noise ratio, Mics: (Mi 1 & 2) Better than 76dB
-
Phantom Power: DC 48V
-
Tone Control: (Bass:100kHz, Treble:10kHz) +/- 12dB
-
Colour / Finish: Black
-
Dimensions: 440 x 360 x 88mm
-
Weight: 7.8kg
-
Rack Mount Kit: Yes Fitted
-250x250.png)
-250x250.png)
-250x250.jpg)
-250x250.png)
-250x250.png)
-250x250.png)
